v
Your current location: Home-> Service and Support->Search result
Product search support
v
TX-NR609
Product Support
Firmware Update-TX-NR609 Firmware Update  Time:2018-12-23
User Manual Download-Time:2015-09-29
User Manual
Firmware Update
Software Update
FAQ
News and Notice

TX-NR609 Firmware Update             

      

Latest Firmware Number (16 digits): 1141-1600-0010-8106

 As of 10 Jul 2012

  • Corrects problem of HDMI video output no longer working while the “Network Standby” setting is enabled;

As of Mar 20, 2012

  • Stabilizes video output when using HDMI/CAT5 Extender on HDMI OUT MAIN terminal

As of 20 December 2011

  • Improves noise during playback of DTS-HD Master Audio with particular Blu-ray disc
  • Corrects operation of speaker distance calculation in Audyssey 2EQ

As of 31 October 2011

  • Supports Onkyo Remote App for Android version: 1.00;
    *it is also necessary to update the App. 

As of 15 September 2011

  • Stabilizes continuous playback from USB memory/DLNA server; 

As of 8 August 2011

  • Adds support for AUPEO! Personal Radio, Internet Music Service;
  • Enhances operability with the Remote App for Android;
  • Adds support for Last.fm Internet Radio Service.

As of 15 July 2011

  • Improves picture output of 1080p/24 sources;
  • Reduces noise during audio playback from iPod/iPhone via USB port.

As of 23 June 2011

  • Improves UWF-1 connectivity;
  • Supports access points with non-alphanumeric SSID. (e.g. !, #, &, etc...).

As of 6 June 2011

  • Improves audio/video output in HDMI Through mode;
  • Stabilizes configuration of static IP address in network settings.

As of 17 May 2011

  • Reduces noise in Picture Mode (Edge Enhancement, Custom, Cinema);
  • nhances the picture quality;
  • Improves playback of NET/USB input;
  • Improves the on-screen display (OSD).

As of 26 April 2011

  • Supports manual setting of hexadecimal WEP keys for UWF-1.
    *Please input the WEP key again after updating firmware.  

 Precautions for TX-NR609

  1. Please read the update instructions carefully before beginning. 
  2. The firmware update should take 30 to 40 minutes. Once the update begins, don't turn off the power supply to the A/V receiver until it is time to restart it.
  3. Depending on the conditions of the network, a firmware update via a network may take more than one hour or even fail to finish. If the update is not completed within two hours, turn off the power supply by pushing the ON/STANDBY button and then try updating again from the beginning.
  4. Updating the firmware and adjusting the settings will be done automatically, but may take some time to complete. Please follow the procedures as instructed when you update. Note that the update may fail, or cause problems for your A/V receiver, if you do any of the following:
    • Pull out the A/V receiver’s power cord;
    • Interrupt the power supply to the A/V receiver (e.g. if the breaker is tripped or if there is an electrical outage);
    • Insert or remove the LAN cable from a device in your network when updating over a network; 
    • Insert or remove a USB memory device from the A/V receiver when updating via USB;
    • Operate components connected to the A/V receiver, such as a TV, a recording device, or a PC.
    • For detail about Open Source Software, please refer to the link below.

      https://www.onkyo.com/manual/oss/rcv01.pdf 

     

     

    Site Map  |   Contact Us  |   Join Us  |   Terms & Conditions  |   Privacy Policy  |   Delivery and Return Policy  |   Links  
    |  

    © 2015 Pioneer & Onkyo Marketing Asia Ltd. All rights reserved.
    rss
    v